WackerVuck. VINNOL H 40/60

Brand：WackerVuck.
Model：VINNOL H30/48 M
Appearance：White powder.

Product description：
VINNOL® H 30/48 MIt's a trinity condensed with a molybdenum.，Date of receipt of the relevant documents.70Weight％vinyl chloride.（VC）、Date of receipt of the relevant documents.29Weight％ethylene acetate.（VAc）Agreement1Weight％It's a binary molybdenum.。The main use is as a glue for surface coating compounds and printing ink.

Product characteristics：
VINNOL® H 30/48 MIt's a heat-plastic physical dry glue.， When the solvent in the formula volatilizes, it forms a thin membrane.。
♪ With all of it ♪VCIt's like a co-polymer.，VINNOL® H 30/48 MVery tough.，♪ Showing permanent flexibility and grinding ♪，There's almost no swelling in the water.，Low gas penetration。It's still oil.、Grease.、Hydraic acid、Alkaline and salt solutions and fat people ' s hydrocarbons（It's like white wine.）There's a lot of resistance to alcohol.。
Special Functions
1、Because there's a pedal in it.，VINNOL® H 30/48 MIt's finely attached to the surface of the metal.。VINNOL® H 30/48 MIt's a condensate of high acetate ethylene ester.。That's why.，It's especially suited to be flexible as a formulation.VINNOL®-Sticking agent for coatings and printed ink formulations。In addition,，It is also strongly recommended that:VINNOL®The temperature of the seals is reduced in the thermal paints that are based on it.。
2、VINNOL® H 30/48 MSolubility in a variety of monolithics enables them to be used as additives for solvent-free purposes100%System，To improve the wetness or decrease the contraction of adsorption and pigments。
It can also be used as a reaction agent or as an auxiliary glue in a binary system.。For example...，It can be associated with icylate.、Intersection of epoxy resins or melamine resins。

Technical indicators：
KValue：47 - 49 DIN EN ISO 1628-2
Dynamic viscosity 20%Buttone solution 20.0 °C ：35 - 55 mPa·s DIN 53015 (20°C)
Acidity/Soapizations：5.5 - 8.5 mg KOH/g
choline content：40.7 - 41.9 wt. %
Volatile substances：< 1 wt. %
Expiration Time（Yes.MEKMedium20%）：Date of receipt of the relevant documents.45sec DIN EN ISO 2431 (4 mm)
Stack Density： Date of receipt of the relevant documents. 750 kg/m³ DIN EN ISO 60
Density 23 °C：1.33g/cm³ DIN 66137-2
Glass temperature ：Date of receipt of the relevant documents.65℃ DSC (DIN 53765 / ISO 11357-5)
Molecular weight(Mw)：60000 - 80000 g/mol SEC,  PS-Standard
particle size ：< 1.0 mm

Scope of application：
Hot paint.
Metal paint
Paper and film coatings
Ink printing
Introduction
Body paint.